Dual FTP CAT5E Lan Cable

Product Detail

Dual FTP CAT5E Lan Cable






Description:
This Cable meets cat5e requirement of both TIA /EIA-568-B.2 and IEC 61156-5 and IEC/ISO 11801. The cable contains 2 double foiled groups of 4 twisted pair laid in parallel and jacketed as Fig-8 (Siamese) cable with PVC compound for indoor use, fixed installation.
Each group have a round configuration, one is marked with a longitudinal rib.




Construction Parameters:
Center Conductor:	Bare Copper or Solid CCA (Copper Clad Aluminum)
Construction :	24AWG
Cable :	8 wires formed into 4 insulated twisted pairs.
Core Insulation:	HDPE High Density Polyethylene
Construction:	0.90±0.05mm
Core Identification:	4 colour coded twisted Pairs: Blue+White/Blue, Orange+White/Orange, Green+White/Green, Brown+White/Brown.
Screening/Shielding:	Aluminum Foil Polyester Tape, Foil face outside.
Coverage:	120%
Drain Wire:	TC( tinned copper)/CCA
Outer Sheathing:	PVC (Polyvinyl Chloride), Flameproof / LSZH (Low Smoke Zero Halogen) / PE (outer door).
Jacket Overall Diameter:	6.0±0.1mm
Outer Jacket Colour:	Customization.  with different color stripe is available.
Stripping cord:	200D×3
Packing:	1000FT(305M)/Easy Pull Box
Making:	As required by customer
Test:	100% pass Fluke test.
Supplied on 305M(1000ft) Roll, housed within an 'easy pull' outer Box.

 

Electrical Properties:(BC ITEM)
Conductor DC Resistance:	?9.5 Ohms/100m
Unbalance of Pair DC Resistance:	?2.5%
Dielectric Strength between Pairs:	?1.0 Kv/min
Pair Mutual Capacity:	?5.6 nF/100m
Insulation Resistance:	?5000 MO.km
Pair Capacitance Unbalance:	?330 pF/100m
Operating Temperature:	-20? to +60? / -40? to + 75?
Installation Temperature:	-20? to +60?
Delay Skew (1 to 100MHz):	?45 ns/100m

 

 

 

UTP (unshielded twisted pair) cables are found in many Ethernet networks and telephone systems. For indoor telephone applications, UTP is often grouped into sets of 25 pairs according to a standard 25-pair color code originally developed by AT&T. A typical subset of these colors (white/blue, blue/white, white/orange, orange/white) shows up in most UTP cables. Typically, UTP would be used in an office setting.


STP (shielded twisted pair) cable for environments with lots of potential interference, or if you must place cable in extremely sensitive environments that may be susceptible to the electrical current in the UTP, shielded twisted pair may be the solution. Shielded cables can also help to extend the maximum distance of the cables.


FTP (foiled twisted pair) cable contains multiple pairs of copper wire enclosed in a sheath of aluminum foil. It's used in wiring systems in buildings or other environments where heavy noise adjacent to the wire might cause interference. The foil provides insulation not afforded by UTP (unshielded twisted pair), the most common kind of structural wiring. The disadvantage of FTP is that it requires somewhat more care in "earthing" (grounding) than UTP and electrical impedances must be matched when connecting to UTP. Typically, FTP might be used in a factory setting.




Packing:
















Company View:











Shipping:
















Certificates: